23 October 2026
THE BUYER'S GUIDE / SELECTION
A buyer-focused guide to selecting the Waterproof Breathable Membrane and HookandLoop Fastener from Shanghai Weibangxun International Trade Co., Ltd. It covers the listed specifications (waterproof rating, MVTR, temperature range, thickness, width, fastener bonding strength and cycle life), matches them to application needs, and lists what buyers should confirm before ordering.
Waterproof rating against project requirement (listed ≥ 10,000 mm H₂O)
Breathability / moisture vapor transmission (listed MVTR ≥ 5,000 g/m²·24h) and test method
Service temperature range (listed -30 °C to 80 °C) and UV/corrosion exposure
Thickness (0.01–2.0 mm) and width (100–150 cm), both customizable, with confirmed tolerances
Fastener bonding strength (listed ≥ 1.5 N/cm) and cycle life (up to 10,000 cycles)
Fastener substrate compatibility: textile, plastic, metal, wood
Material per component (TPU / HDPE / PP membrane; nylon and polyester fastener) and hardness 80A–95A
Customization: colors, digital/screen printing, logos via heat transfer, embossing or screen printing
Documented compliance for the target market and intended use
Procurement teams sourcing for building envelopes, outdoor gear or protective covers often need two things at once: a membrane that keeps liquid water out while letting water vapor escape, and a fastening method that can be opened and closed repeatedly. The Waterproof Breathable Membrane and HookandLoop Fastener offered by Shanghai Weibangxun International Trade Co., Ltd. combines both. This guide explains how to check the published specifications against your project requirements, and where you should ask for confirmation before you buy.
Before comparing figures, write down:
| Parameter | Listed value |
|---|---|
| Brand/Model | HMJ / HMJ-TPU-001 |
| Material | 100% TPU / HDPE / Polypropylene |
| Thickness range | 0.01 mm – 2.0 mm (customizable) |
| Width range | 100 cm – 150 cm (customizable) |
| Hardness | 80A – 95A |
| Waterproof rating | ≥ 10,000 mm H₂O |
| Breathability | MVTR ≥ 5,000 g/m²·24h |
| Temperature range | -30 °C to 80 °C |
| Bonding strength (fastener) | ≥ 1.5 N/cm |
| Cycle life | Up to 10,000 cycles |
According to the product description, the membrane uses a micro-porous HDPE/PP structure reinforced with non-woven fabric. That structure is meant to keep rainwater out while letting internal moisture escape, which helps prevent condensation. The fastener is described as made of nylon and polyester, and the supplier says it is suitable for textile, plastic, metal and wood surfaces.
Compare the listed minimums (≥ 10,000 mm H₂O and MVTR ≥ 5,000 g/m²·24h) with your project specification. If you are designing a building envelope, check that these figures meet the requirements of your design and local code. Ask which test methods were used, because MVTR results depend on the method.
The listed service range is -30 °C to 80 °C, and the materials are described as UV-resistant and corrosion-resistant. If your installation regularly goes beyond this range, this product does not fit your requirement as published.
The listed thickness runs from 0.01 mm to 2.0 mm and the width from 100 cm to 150 cm, and both can be customized. Confirm the exact thickness, width and tolerance for your order. Ask whether the waterproof and MVTR figures apply to every thickness in the range.
The listed bonding strength is ≥ 1.5 N/cm, with a cycle life of up to 10,000 cycles. If your product will be opened and closed more often than that, or needs higher holding strength, ask for confirmation or look for another solution.
The supplier lists multiple thicknesses and colors, digital and screen printing, and custom logos through heat transfer, embossing or screen printing.
This product may not be the right choice if your project needs service temperatures outside -30 °C to 80 °C, ratings above the listed minimums, fastener cycle life beyond 10,000 cycles, roll widths outside 100–150 cm that cannot be customized, or certifications that the supplier cannot document.
To discuss your application or request documents, see the Waterproof Breathable Membrane and HookandLoop Fastener product page.
THE COMPANY
Shanghai Weibangxun International Trade Co., Ltd. was founded in 2026. Rooted in Shanghai, the core hub of China's foreign trade, it is an innovative enterprise engaged in global trade with building materials as its core business. Leveraging the policy dividends of the China (Shanghai) Pilot Free Trade Zone, the supply chain advantages of the building materials industrial cluster in the Yangtze River Delta, and the logistics convenience of international ports, the company has established its development…
YOUR NEXT STEP
Use case, specification, quantity and delivery window: make the next conversation specific.
Hit enter to search or ESC to close